Andreas Müller

2024

• Reuter T., Dittrich V., Müller A., Hausotte T.:
  Transferring measured X-ray focal spots to virtual CT systems for more realistic simulations of dimensional measurements
  13th Conference on Industrial Computed Tomography (iCT) 2024 (Wels, 6. Februar 2024 - 9. Februar 2024)
  DOI: 10.58286/29234
  URL: https://www.ndt.net/article/ctc2024/papers/Contribution_193.pdf

2023

• Müller A., Binder F., Hausotte T.:
  Teilprojekt 3: Metrologie und Messdatenverarbeitung für die geometrische Produktverifikation im Rahmen eines ganzheitlichen Toleranzmanagements.
  In: Sandro Wartzack (Hrsg.): Abschlussbericht DFG-Forschungsgruppe FOR 2271, 2. Phase.Prozessorientiertes Toleranzmanagement mit virtuellen Absicherungsmethoden, Erlangen: FAU University Press, 2023, S. 65-84
  ISBN: 978-3-96147-660-2
  DOI: 10.25593/978-3-96147-660-2
  URL: https://opus4.kobv.de/opus4-fau/frontdoor/index/index/docId/23413

2022

• Butzhammer L., Müller A., Hausotte T.:
  Calibration of 3D scan trajectories for an industrial computed tomography setup with 6-DOF object manipulator system using a single sphere
  In: Measurement Science & Technology 34 (2022), S. 015403
  ISSN: 0957-0233
  DOI: 10.1088/1361-6501/ac9856
• Müller A., Hausotte T.:
  Improving template-based CT data evaluation by integrating CMM reference data into a CAD model-based high fidelity triangle mesh
  In: Nondestructive Testing and Evaluation (2022)
  ISSN: 1058-9759
  DOI: 10.1080/10589759.2022.2091135
• Orgeldinger C., Wohlgemuth F., Müller A., Hausotte T.:
  Towards efficient application-dependent dimensional measurements with computed tomography: optimized reduction of measurement duration using continuous scan mode: experimental investigations
  In: Journal of Sensors and Sensor Systems 11 (2022), S. 219-223
  ISSN: 2194-8771
  DOI: 10.5194/jsss-11-219-2022
• Reuter T., Müller A., Hausotte T.:
  Einfluss des Bildrauschens innerhalb der Messkette eines industriellen Computertomografen - Propagation of image noise through the measurement chain in industrial X-ray computed tomography
  DGZfP-Jahrestagung 2022 (Kassel, 23. Mai 2022 - 25. Mai 2022)
  Open Access: https://jahrestagung.dgzfp.de/Portals/jt2022/bb/Mo.3.C.1.pdf
  URL: https://jahrestagung.dgzfp.de/Portals/jt2022/bb/Mo.3.C.1.pdf

2021

• Müller A., Hausotte T.:
  Analysis of the random measurement error of areal 3D coordinate measurements exclusively based on measurement repetitions
  In: Technisches Messen 88 (2021), S. 71-77
  ISSN: 0171-8096
  DOI: 10.1515/teme-2020-0087

2020

• Butzhammer L., Müller A., Hausotte T.:
  Comparison of Geometrically Derived Quality Criteria regarding Optimal Workpiece Orientation for Computed Tomography Measurements
  10th Conference on Industrial Computed Tomography, Wels, Austria (iCT 2020) (Wels, 4. Februar 2020 - 7. Februar 2020)
  Open Access: https://www.ndt.net/article/ctc2020/papers/ICT2020_paper_id102.pdf
  URL: https://www.ndt.net/search/docs.php3?id=25083
• Heling B., Müller A., Schleich B., Hausotte T., Wartzack S.:
  Bestimmung und Berücksichtigung der Einzelpunktmessunsicherheit in virtuellen Toleranzanalysen
  Summer School Toleranzmanagement 2020 (Erlangen, 28. September 2020 - 28. September 2020)
  In: Summer School Toleranzmanagement - Beiträge zur 4. Summer School - September 2020, Stammsried: 2020
• Müller A., Butzhammer L., Wohlgemuth F., Hausotte T.:
  Automated evaluation of the surface point quality in dimensional X-ray computed tomography
  In: Technisches Messen 87 (2020), S. 111-121
  ISSN: 0171-8096
  DOI: 10.1515/teme-2019-0116
  URL: https://www.degruyter.com/view/j/teme.2020.87.issue-2/teme-2019-0116/teme-2019-0116.xml
• Müller A., Hausotte T.:
  Determination of the single point precision associated with tactile gear measurements in scanning mode
  In: Journal of Sensors and Sensor Systems 9 (2020), S. 61-70
  ISSN: 2194-8771
  DOI: 10.5194/jsss-9-61-2020
• Müller A., Hausotte T.:
  Improving geometry element regression analysis for dimensional X-ray computed tomography measurements using locally determined quality values
  10th Conference on Industrial Computed Tomography (iCT) 2020 (Wels, 4. Februar 2020 - 7. Februar 2020)
  Open Access: https://www.ndt.net/article/ctc2020/papers/ICT2020_paper_id164.pdf
  URL: https://www.ndt.net/search/docs.php3?id=25116
  (Conference report)
• Müller A., Schubert D., Drummer D., Hausotte T.:
  Determination of the single point uncertainty of customized polymer gear wheels using structured-light scanning with various polygonization settings
  In: Journal of Sensors and Sensor Systems 9 (2020), S. 51-60
  ISSN: 2194-8771
  DOI: 10.5194/jsss-9-51-2020

2019

• Heling B., Müller A., Schleich B., Hausotte T., Wartzack S.:
  Consideration and impact assessment of measurement uncertainty in the context of tolerance analysis
  In: Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition 2019
  DOI: 10.1115/imece2019-11328
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5ddb8789d187d
• Müller A., Butzhammer L., Hausotte T.:
  Implementation of a beam hardening correction method for mono material parts using a linearization technique
  International Symposium on Digital Industrial Radiology and Computed Tomography (Fürth, 2. Juli 2019 - 4. Juli 2019)
  In: International Symposium on Digital Industrial Radiology and Computed Tomography, Berlin: 2019
  Open Access: https://www.dir2019.com/portals/dir2019/bb/We.3.A.2.pdf
• Müller A., Hausotte T.:
  About the need for optical gear measurements using a beam diversion mechanism in order to obtain truthful surface texture parameters / Beurteilung der Notwendigkeit einer Strahlumlenkung für optische Zahnradmessungen zur Bestimmung korrekter Oberflächentexturkennwerte}}
  In: Technisches Messen 86 (2019), S. 87--91
  ISSN: 0171-8096
  DOI: 10.1515/teme-2019-0044
  URL: https://www.degruyter.com/view/j/teme.2019.86.issue-s1/teme-2019-0044/teme-2019-0044.xml
• Müller A., Hausotte T.:
  Comparison of different measures for the single point uncertainty in industrial X-ray computed tomography
  9th Conference on Industrial Computed Tomography (​Centro Culturale Altinate San Gaetano, Padova, 13. Februar 2019 - 15. Februar 2019)
  Open Access: https://www.ndt.net/article/ctc2019/papers/iCT2019_Full_paper_31.pdf
  URL: http://www.ndt.net/iCT2019
• Müller A., Hausotte T.:
  Utilization of single point uncertainties for geometry element regression analysis in dimensional X-ray computed tomography
  9th Conference on Industrial Computed Tomography (​Centro Culturale Altinate San Gaetano, Padova, 13. Februar 2019 - 15. Februar 2019)
  Open Access: https://www.ndt.net/article/ctc2019/papers/iCT2019_Full_paper_30.pdf
  URL: http://www.ndt.net/iCT2019
• Müller A., Hausotte T.:
  Verbesserung dimensioneller Messungen auf Grundlage der Einzelpunktgüte und -Messunsicherheit
  9. VDI-Fachtagung Messunsicherheit 2019 - Messunsicherheit praxisgerecht bestimmen (Erfurt, 13. November 2019 - 14. November 2019)
  In: VDI-Berichte Nr. 2365 2019
  DOI: 10.51202/9783181023655-179
• Müller A., Heling B., Schleich B., Oberleiter T., Willner K., Wartzack S., Hausotte T.:
  Methoden zur Reduzierung und Berücksichtigung der Unsicherheiten von dimensionellen Messgrößen in der Toleranzanalyse
  Industriekolloquium der Forschergruppe FOR 2271 (Erlangen, 5. Februar 2019 - 5. Februar 2019)
  In: Wartzack (Hrsg.): Industriekolloquium der Forschergruppe FOR 2271, Stamsried: 2019
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c6a7ab3612b6
• Müller A., Metzner S., Hausotte T.:
  Characterization of the single point precision of steel gear wheel measurements using tactile coordinate measurement machines in scanning mode
  20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg, 25. Juni 2019 - 26. Juni 2019)
  In: AMA Service GmbH (Hrsg.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019
  DOI: 10.5162/sensoren2019/P2.18
  URL: https://www.ama-science.org/proceedings/details/3485
• Müller A., Metzner S., Hausotte T., Schubert D., Drummer D.:
  Separation of locally determined work piece deviations and measurement uncertainties for structured-light scanning of customized polymer gear wheels
  20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg, 25. Juni 2019 - 26. Juni 2019)
  In: AMA Service GmbH (Hrsg.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019
  DOI: 10.5162/sensoren2019/6.4.1
  URL: https://www.ama-science.org/proceedings/details/3467
• Müller A., Oberleiter T., Willner K., Hausotte T.:
  Implementation of Parameterized Work Piece Deviations and Measurement Uncertainties into Performant Meta-models for an Improved Tolerance Specification
  International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
  In: Proceedings of the Design Society: International Conference on Engineering Design 2019
  DOI: 10.1017/dsi.2019.357
• Oberleiter T., Müller A., Hausotte T., Willner K.:
  SURROGATE MODELING CONSIDERING MEASURING DATA AND THEIR MEASUREMENT UNCERTAINTY
  UNCECOMP 2019 - 3rd ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering (Crete, 24. Juni 2019 - 26. Juni 2019)
  In: M. Papadrakakis, V. Papadopoulos, G. Stefanou (Hrsg.): Uncecomp 2019 Proceedings 2019
  DOI: 10.7712/120219.6347.18786
  URL: https://2019.uncecomp.org/proceedings/
• Orgeldinger C., Wohlgemuth F., Müller A., Hausotte T.:
  Spot size and detector unsharpness determination for numerical measurement uncertainty determination
  9th Conference on Industrial Computed Tomography (Padova, 13. Februar 2019 - 15. Februar 2019)
  Open Access: https://www.ndt.net/article/ctc2019/papers/iCT2019_Full_paper_12.pdf
  URL: http://www.ndt.net/iCT2019

2018

• Metzner S., Ramesh R., Müller A., Hausotte T.:
  Evaluation of reflection properties of sheet bulk metal formed parts by pixel wise analysis of camera images provided for triangulation measurement
  19. ITG/GMA-Fachtagung Sensoren und Messsysteme (Nürnberg, 26. Juni 2018 - 27. Juni 2018)
  In: ITG-Fachbericht 281 Sensoren und Messsysteme, Berlin: 2018
• Müller A., Hausotte T.:
  Data fusion of surface data sets of X-ray computed tomography measurements using locally determined surface quality values
  In: Journal of Sensors and Sensor Systems 7 (2018), S. 551--557
  ISSN: 2194-8771
  DOI: 10.5194/jsss-7-551-2018
  URL: https://www.j-sens-sens-syst.net/7/551/2018/
• Müller A., Wohlgemuth F., Hausotte T.:
  Simulation-based correction of systematic errors for CT measurements
  8th Conference on Industrial Computed Tomography (Wels, 6. Februar 2018 - 9. Februar 2018)
  Open Access: http://www.ndt.net/article/ctc2018/papers/ICT2018_paper_id127.pdf
  URL: http://www.ndt.net/iCT2018
• Wohlgemuth F., Müller A., Hausotte T.:
  Development of a virtual metrological CT for numerical measurement uncertainty determination using aRTist 2
  In: Technisches Messen 85 (2018), S. 728-737
  ISSN: 0171-8096
  DOI: 10.1515/teme-2018-0044

2016

• Fleßner M., Müller A., Götz D., Helmecke E., Hausotte T.:
  Assessment of the single point uncertainty of dimensional CT measurements
  6th Conference on Industrial Computed Tomography (Wels, 9. Februar 2016 - 12. Februar 2016)
  In: NDT.net issue Vol.21 No.02 2016
  Open Access: http://www.ndt.net/article/ctc2016/papers/ICT2016_paper_id48.pdf
  URL: https://www.ndt.net/article/ctc2016/papers/ICT2016_paper_id48.pdf

2015

• Fleßner M., Müller A., Helmecke E., Hausotte T.:
  Automated detection of artefacts for computed tomography in dimensional metrology
  International Symposium on Digital Industrial Radiology and Computed Tomography (DIR 2015) (Gent, 22. Juni 2015 - 25. Juni 2015)
  In: Digital Industrial Radiology and Computed Tomography 2015
  Open Access: http://www.ndt.net/events/DIR2015/app/content/Paper/35_Flesner.pdf
  URL: http://www.ndt.net/events/DIR2015/app/content/Paper/35_Flesner.pdf
• Fleßner M., Müller A., Helmecke E., Hausotte T.:
  Evaluating and visualizing the quality of surface points determined from computed tomography volume data
  MacroScale 2014 - Recent developments in traceable dimensional measurements (Wien, 28. Oktober 2014 - 30. Oktober 2014)
  In: PTB open access repository 2015
  DOI: 10.7795/810.20150223A